JLM Trains, L.L.C.

Rubber Stamps for Restorations

JLM Trains is proud to announce that we have acquired the tooling and equipment to produce the highest quality rubber stamps from Jerry Butler Rubber Stamps. 

All of the rubber stamps offered are made by a photoengraving process. Lettering was photographed on original cars or locomotives, retouched and the resulting image was used to produce the engraved steel dies. This enables you to restamp your restored trains and accessories with lettering identical to the original. No stock type is used.

 

Getting Started

The easiest way to get started is with our Ink Stamping Starter Kit. It contains everything you need except the stamps and cleanup solvent (mineral spirits works best). It consists of the proper roller, glass plate, one bottle each of black, gold, silver and white oil based inks, lint free cleanup pads and full instructions. 

Ink Stamping Starter Kit as described above………………$35.00

Ink

All of our ink is specially formulated to cover properly and dry on a non porous surface. A small amount of retarder is added to make it dry slower in the event that you mis-stamp and have to wipe off the lettering and try again. Once you are satisfied with your work, drying overnight is recommended. Ink can be thinned or cleaned up with mineral spirits. Each color is shipped in a small 1/2 ounce bottle and contains enough ink to make hundreds of impressions with medium sized stamps.

Gold Ink 1/2 Ounce Bottle………………………$5.00

Silver Ink 1/2 Ounce Bottle………………………$5.00

Black Ink 1/2 Ounce Bottle………………………$5.00

White Ink 1/2 Ounce Bottle………………………$5.00

 

 

“Lionel” , “Encircled L” and “American Flyer” marks are the exclusive property of Lionel L.L.C.

Marks licensed by Lionel L.L.C.

Lionel L.L.C. hereby grants the end user of this Licensed Stamp the limited, non-exclusive right to use the marks contained on this stamp solely for their personal, non-commercial usage.  Lionel L.L.C. retains all title to the marks and images contained upon this stamp and no title or any intellectual property is transferred to the end-user via this sublicense.  Any attempts to alter these marks or use them in a for-profit manner will invalidate this license.

IVES marks are the exclusive property of MTH Electric Trains

Marks licensed by MTH Electric Trains

MTH Electric Trains hereby grants the end user of this Licensed Stamp the limited, non-exclusive right to use the marks contained on this stamp solely for their personal, non-commercial usage.  MTH Electric Trains retains all title to the marks and images contained upon this stamp and no title or any intellectual property is transferred to the end-user via this sublicense.  Any attempts to alter these marks or use them in a for-profit manner will invalidate this license.